Brand: Only944

Part #: P42 / P43

Price:  $00.00

In Stock: Yes

Qty Included: Two (2)

Application: 924 (86.5-88), 944 (86.5-91), 968 (92-95)

Notes: Porsche changed the sunroof seal in the middle of 1986. If you car is 1986 please check your vin number for proper fit, or email us.

924 (1986-)   Vin# 50584 and higher
944 (1986-)   Vin# 58670 and higher
951 (1986-)   Vin# 54953 and higher

Description:

The sunroof seal is a replacement for Porsche part numbers 944-564-114-04, 944-564-114-05, and 944-564-623-00.

These seals are both sunroof seals. The one that attaches to the sunroof and the one on the body of the car.

Over time the seals become dried out and/or crack and break, allowing water to enter the car. The original Porsche sunroof seal is a cut length of seal, not a solid loop like ours. We believe this aids in the seal not fitting right and over time will allow the seal to leak. The original seal can shrink, or get distorted on the ends, allowing water to enter the car. Our seal is a solid, one piece seal that’s been cut to the right size, looped and welded together, eliminating this future problem. Cracks and gaps in the seal are the easiest way for water to get into the car through the sunroof. So if your sunroof is leaking, or you have a gap where the seal comes together, you will need a new seal. Our seal is about half the cost of the original seal, a better design and has free shipping(inside the US).

Check out the instructions Here

One of the problems in a leaking sunroof seal is a gap in the seal, like in the picture above. If your seal looks like this, you need a new one to be able to seal the sunroof properly.